SCULPFUN S6 Pro Laser Engraving Machine

Features:
1.Spot compressed ultra-thin focus laser: The latest 5.5W LD+FAC spot compression laser has an ultra-fine 0.08mm square laser focus, which is 2 times thinner than ordinary lasers and has a higher energy density. In the comparison of the cutting effect of wood/acrylic , the LD+FAC laser engraving traces are thinner, and the cutting penetration of the laser is stronger.

2. New eye protection design: The laser filter cover filters 98% of the ultraviolet light to eye, You and the people around you can watch laser engraving without wearing goggles. The cover also prevents animals grabing the laser spot.

3、Fast  focusing design: S6 has the fastest focusing design on the market. You only need to slide the laser and tighten the screw to complete the focusing.  S6 laser combined fixed focus lens and sliding design . 

4、Solid and quick assembly structure design: The all-metal structure design makes the machine more solid, and improve the accuracy of engraving. The whole structure is designed for quick installation, it usually takes 10-20 minutes to finish installation.

5.Wide compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, GrblController, supports PWM mode engraving, supports Windows system, MAC system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, AI, G-code, NC, BMP, etc.

6.Square measuring ruler axis: X-Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects . The 410x420mm large engraving area can meet  various engraving needs.

7.Safety design: There is a power switch on the machine for emergency power off. Fixing holes are reserved on the four feet and the body to  fixi the machine and the data cable.

8、A4 size steel pad ：A gift of A4 size steel pad can well protect your table from laser damage

Product information:
Product model: SCULPFUN S6 Pro
Engraving size: 410*420mm
Engraving/cutting material：
Engraving materials: wood, paper, cardboard, plastic, white, PCB board, aluminum oxide,  black-painted metal/ceramic
Cutting material: cardboard,  fabric, wood board, bamboo, acrylic,  plastic board;
Total machine power: 20-30W
Laser output optical power: 5.5-6W
Laser wave length 455±5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser + sliding device
Laser protective cover: The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.
Laser software:  LaserGRBL, LightBurn,  GrblController,  support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission method: USB connection
Power supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5A
Equipment net weight: 3.0kg
Package weight: 4.4kg
Packing size: 615*345*130mm
Certification: CE FCC RoHS FDA

S6 Pro engraving machine packing list:
1× X axis assembly
2× X shaft
2× Y shaft
1×control box module set
3×support feet
1×laser module set
1×12V 5A power adapter
1×power adapter
1×USB cable
Step 1~5 Screw installation package
2× belt
1× T-shaped M5 screwdriver
1× L-shaped M4 screwdriver
1× L-shaped M3 screwdriver
10×Tie
1×  8-10mm nut wrench
1× brush
1× Laser goggles
2×   10x10cm  wood chip 3mm thickness
1× A4 size steel desktop protection pad

Note:
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.